Pilot freight eHighway to be built in Carson, California

Source: Hybridcars.com

eHighway Project In Los Angeles
A pilot project of eHighway will run close to the Ports of Los Angeles as a first step to test the viability of the concept: electrified highways charging the vehicles running on them.
The Siemens company has been selected by the South Coast Air Quality Management District (SCAQMD) to install an eHighway system in the proximity of the Ports of Los Angeles and Long Beach, the two largest ports in the U.S.
Siemens eHighway is the electrification of select highway lanes via a catenary system which supplies trucks with electric power, similar to how modern day trolleys or streetcars are powered on many city streets, while still offering the same flexibility as diesel trucks.
According to Siemens, a two-way, one-mile mile catenary system will be installed by Siemens and the system will be demonstrated with different battery-electric and hybrid trucks. The expected result is lower fossil fuel consumption, substantially reduced smog-forming, toxic and CO2 emissions, and lower operating costs. Siemens and the Volvo Group, via its subsidiary Mack Trucks brand, are developing a demonstration vehicle for the project.
“As the first and second busiest container ports in the U.S., Long Beach and Los Angeles can benefit tremendously from the eHighway system, significantly reducing emissions from commercial trucks that normally contribute to much of the air pollution in this region,” said Matthias Schlelein, president of Siemens Mobility and Logistics division in the U.S. “These intricate logistical hubs need to meet increasing local and global demand for goods, and by improving the transportation systems in and around the Port, we hope to help them meet this demand through the use of sophisticated and innovative electrification technology while at the same time improving the local environmental conditions like air quality. The economic logic of the eHighway system is very compelling for cities like LA, where many trucks travel a concentrated and relatively short distance. Highly traveled corridors such as this are where we will initially see eHighway being applied.”
Siemens said it also is supplying current collectors, the technology that allows trucks to connect and disconnect from the catenary system at any speed, to local California truck integrators whose vehicles will also be part of the demonstration.
“I’m happy to see the Los Angeles region leading the way in bringing cutting edge technology to an increasingly important economic center,” said Los Angeles Councilman Joe Buscaino. “The eHighway project is a great example of how electricity can help power the next generation of transportation systems while also providing cleaner air for our citizens in the process.”
Siemens explained the catenary infrastructure will be installed on the North and South-bound sections of Alameda Street where it intersects with Sepulveda Boulevard in Carson, California. Up to four trucks will be running in the demonstration, making multiple drives per day. Through the use of a current collector the trucks can connect and disconnect from the catenary system at any speed for dynamic power supply directly to the electric engine and for on-board storage. To further ensure the same flexibility as conventional trucks, the eHighway vehicles use an electric drive system, which can be powered either by diesel, compressed natural gas (CNG), battery or other on-board energy source, when driving outside of the catenary lines. 
”This project will help us evaluate the feasibility of a zero-emission cargo movement system using overhead catenaries,” said Barry Wallerstein, SCAQMD’s executive officer. “Southern California’s air pollution is so severe that it needs, among other strategies, zero- and near-zero emission goods movement technologies to achieve clean air standards.”
SCAQMD is the air pollution control agency for Orange County and major portions of Los Angeles, San Bernardino and Riverside counties, the most polluted region in the nation. The agency said for more than 25 years, its Technology Advancement Office has fostered advanced low- to zero-emission technologies for a wide range of mobile sources, from passenger vehicles to ocean-going ships.
SCAQMD commissioned a report by independent consultancy Gladstein, Neandross & Associates (GNA), which investigated how air quality can be improved, despite increases in drayage traffic between the ports and inland logistic hubs. GNA concluded that catenary hybrid vehicles “can simultaneously address emissions and fuel economy issues while providing operational flexibility at a similar or lower cost of ownership as other zero-emission technologies”.
The demonstration project serves the purpose of evaluating the technology, together with the truck manufacturing industry, said SCAQMD. It is the intention of this demonstration to generate a knowledge base for a potential future extension of the system to commercial applications locally and regionally.
The project installation will begin immediately with infrastructure commissioned and first truck integrated in order to start the one year demo in July 2015.
For more information on this technology and its advantages, check out the video below:
To learn more about the Siemens ehighway system, see: